Engineered Wood Flooring – Type, Cost & Installation

If you are considering wood flooring with a limited budget then, engineered wood flooring is the best choice. It gives the feel of the original wood and is cheaper than solid wood flooring. It comprises of layers glued one on top of each other with a top layer of genuine wood. Although it looks like solid wood floors, the creative construction makes it stable and solid.

Engineered Wood Flooring Types

There are different types of engineered wood flooring based on color, wood spices and method of installation.


There are verities of engineered wood flooring colors. Like –

  • Black
  • Grey
  • Orange
  • Red
  • Brown
  • White
  • Yellow

Wood Spices

  • Carbonized bamboo wood
  • Maple engineered wood
  • American Cherry
  • Red oak
  • White oak
  • Walnut
  • Rosewood
  • Birch
  • Bamboo
  • Pine
  • Eucalyptus
  • Santos Mahogany
  • Cypress
  • Poplar

Method of Installation

Before installing engineered wood flooring you need to consider how boards will establish with the right set of tools.

  • Glue-less: Glue-less engineered floor is a standard option for the households. It has tongue and lock edges that interlock conjoining to shape a tight bond.
  • Glued: Glued engineered flooring requires adhesive to apply on joints to expand the grip.
  • Pre-glued: Pre-glued engineered floors come with glue applied on the joints, getting a strengthened bond because of adhesive.

How Thick Should Engineered Wood Flooring Be?

Engineered wood flooring comes in various thicknesses from a very thin ¼ inches thick to a higher quality ¾ inches thickness. The comparison of the ranges are given below –

  • Thin engineered wood board: ¼ inches thick
  • Medium thickness: ½ inches thick
  • Thick: ¾ inches + thick

Engineered Wood Flooring Cost

Engineered wood flooring average cost is around $3 to $10 per square foot. The cost depends on the installation cost, place or location and the property in which you are planning to get the engineered wood flooring done. Property location is also one of the important factors. Note that the cost mentioned is for the materials only; it does not include the installation cost.

How Much to Install Engineered Wood Flooring?

There are varieties of factors about installing engineered wood. Like where you live, the complexity of your project etc. The cost of installing is given below:

  • Low: 1/16 – to 1/12-inch thick engineered hardwood costs an average of $3 to $5 per square foot, with installation costs between $3 and $10 per square foot.
  • Mid: This type of engineered hardwood generally has a thicker veneer and a 5 core and costs an average of $5 to $10 per square foot, with installation costs running $3 to $10 per square foot.
  • High: The top-of-the-line engineered hardwood has 7 or more with a top veneer that’s around 1/6-inch thick. It costs around $8 to $13 per square foot, with another $3 to $10 per square foot in installation costs.

Why should you choose Engineered Wood Instead of Real Wood Flooring?

  • It enlivens the space and adds rustic charm to your home. It is a great option to enhance the aesthetics of your home
  • It’s a time-saving option! Yes, engineered hardwood flooring right after installation is ready to use
  • It gives the appearance of real wood yet a lot of is hard-wearing and enduring than the real wood
  • Less expensive than real wood
  • More stable in humid conditions
  • You can use engineered wood in the kitchen and bathroom which is not possible with the real wood

Engineered Wood Floor – Pros & Cons


  • Cost: Engineered wood floor costs less per square meter than its counterpart.
  • Many installation methods: Unlike solid hardwood, you can float, stable and glue engineered wood. So it has a variety of installation in many ways.
  • Flexible installation: Engineered floors can be installed over any floors without limiting the viability.
  • Easy to maintain: Engineered woods are easy to clean and maintain.
  • Mold resistant: Dissimilar to other flooring materials engineered woods contain no allergic elements so it is ideal for sensitive people. Owing to the melamine barrier, the floor is mold resistant. Be sure that you mop the floor regularly to maximize the protection.
  • Light resistant: The top covered layer of designed hardwood flooring is resistant to daylight beams. Moreover, the melamine covering is tough and withstands abrasion as opposed to wood flooring which gets scratch marks easily.
  • Less sensitive to moisture and humidity: The top layer is a wood facade, while the center layers are made out of plywood, particleboard or fiberglass. These layers are glued together in opposing directions. So when there is high humidity, each layer counteracts the other’s natural tendency to expand or shrink.
  • Environment-friendly: Engineered floors are made from fiber and other materials which save trees from chopped down.


  • Difficult to repair: Hardwood floors are difficult to fix when damaged as they need one to replace the entire block once damaged.
  • Installation skills required: During installation, a gap is required between the floor and the walls. If the wood is installed poorly, there would be a chance of cracking; as a result, it will limit the durability.
  • Low-quality core construction: Some manufacturers have the intention to cut production cost. So they use low-quality materials. This activity brings about flooring that is unstable and prone to damage.
  • High-maintenance: Keeping engineered floors clean is difficult sometimes than maintaining solid hardwood. You need to be careful that what kind of cleaning product you use. Flooding engineered floor with water might result in bacteria growth and decay.
  • Not biodegradable: Engineered floors may pollute the environment when they are being disposed of.